In case of a dial-up connection:

(1)Double-click [Make New Connection] icon.

(2)Type a name for the connection and select the connection type (Dial-Up Connection).

(3)Select a model, set up the TCP/IP settings and Security settings.

(4)Type the phone number for the connection.

(5)In case of a dial-up connection, the information of local location needs to be set up. Set up the information in the later procedure 8.

NOTE

•When you use VPN (Virtual Private Network), set up the connection for using VPN further.

(1)Double-click [Make New Connection] icon.

(2)Type a name for the connection and select [Virtual Private Network].

(3)Type host name or IP address and set up the TCP/IP settings and Security settings.

•Set up a Remote Connection

By setting up a Remote Connection, the WTS/Web server can be connected easily.

(6)Double-click [Make New Connection] icon.

(7)Type a name for the connection and select [Remote Connection Setup].

(8)Select the desired connection from the [Available Connections] list and click [Add] button to set in the [Current Connections]. (Connections listed in the [Current Connections] will be executed with the listed order.)

(9)Select the [Make default connection] check box.

A small window will be displayed on the right bottom of the screen.

Clicking an active button of the small window starts the connection listed in the [Current Connections].

To set an automatically start connection when the 620L boots up, select the [Connect automatically on boot up] check box.

3. SETTING UP the eClient 620L 15