2.CONNECTING THE eClient 620L
This chapter explains how to connect the eClient 620L to a WTS.
2-1. Setting up the eClient 620L
NOTE
•Before connecting the product, set up the monitor after unfolding the base of the stand.
WARNING
Place the eClient 620L on a strong, stable surface. |
|
A unit placed on an inadequate surface may fall, resulting in injury |
|
or equipment damage. If the unit falls, disconnect the power |
|
immediately and have the unit checked by a qualified service | OK |
engineer before using it again. Using a unit after it has been | |
dropped may result in fire or electric shock. |
|
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
* Do not place outdoors.
* Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.)
* Do not place in a dusty or humid environment.
*Do not place in a location where the steam comes directly on the screen.
*Do not place near heat generating devices or a humidifier.
2. CONNECTING THE eClient 620L | 9 |