[Single Button Connect Enable]
...................................(Select the [Terminal Security Enable] check box to
enable this check box.)
The procedure to connect to the WTS can be restricted. When this check box is selected, the “Single Button Connect” dialog box is displayed when the eClient starts up.
Clicking [Connect] in the “Single Button Connect” dialog box, the selected connection in the [Startup…] (see page 22) of “Terminal Connection Manager” starts up.
(“Terminal Connection Manager” is not displayed.)
Canceling Settings
(1)Display the “Single Button Connect” dialog box.
(2)Press [Alt] and [F4] keys at the same time.
(3)“Enter Security Password” dialog box is displayed. Enter the password set in the [Password] of the [Control Panel].
(4)“Terminal Connection Manager” is displayed.
NOTE
•Terminal Security cannot be canceled by this setting.
Administration Console
[Administration Console]
...................................Assign an IP address of a server with the Network
Administrator. Other servers with the Network Administrator will not be able to control the eClient 620L after setting the administration console.
6. USING THE TERMINAL PROPERTIES 47