English

[Server Group] ...............

Select the WTS Group to connect. (A WTS Group

 

consists of [Primary], [Backup 1], and [Backup 2].

 

The WTS will be searched in order of [Primary],

 

[Backup 1], and [Backup 2].

[Add] ..............................

Add another Server address. Type the Server Name

 

or IP address. (The typed Server Name or IP

 

address will be shown in the [Address] list.

[Delete] ..........................

Delete the selected WTS from the [Address] list.

[Default List]...................

Revert the state of the [Address] list to the saved one.

[Address]........................

The added WTS IP address appears.

Click the drop-down list box below [Address]. Select the appropriate WTS

protocol from the list.

 

[TCP browser] ................

Citrix MetaFrame uses UDP protocol to search for the

 

WTS. Select this when using a UDP protocol.

[TCP + HTTP browser] ..

Select this when not using a UDP because of the

 

firewall in your network environment.

[SSL + HTTPS browser]

...................................This is not available with 630L.

Click [OK] to return to the previous page and save the adjustments.

3)Click [Refresh] to refresh the list to the newest information. 4)Select a WTS or a published application from the list.

NOTE

•Published applications are specific application set by a system administrator. When connected, you are presented with the application itself.

Click [Next>].

4. ADDING & CHANGING A CONNETION NAME 51