English
Modifying the settings
This enables to delete printer settings when a printer is connected to the LPT1 port.
1.
2.
Select LPT1 and click [Properties...].
“Printer Properties” dialog box is displayed.
Change the settings as needed.
[Friendly Name] ................. | Changes the printer's name. (If you are naming the |
| printer, the name combination must be 31 character or |
| less.) |
[Manufacture] |
|
[Printers]............................. | Change the Manufacture and the model name of the |
| printer. If the printer is not on the list, please select |
| the compatible printer. See the printer's instruction |
manual.
[Make this the default printer]
...................................Sets/cancels setting the printer as a default. (The 630L
corresponds to only LPT1 port, and only one printer at a time can be installed. The installed printer will be always the default printer.)
Click [OK] to return to the “Terminal Properties” dialog box.
Click [OK] in the “Terminal Properties” dialog box to save the settings and close the “Terminal Properties” dialog box.
6. USING THE TERMINAL PROPERTIES 83