English
Date/Time Settings
Configure the date/time properties of the 630L.
NOTE
•The settings are referred when the client time zone function of the ICA protocol is effective.
•Date and time will return to the default settings if the power cord is unplugged.
1.
2.
“Date/Time Properties” is displayed.
[Date/Time] Tab ................. | Set date, current time, or time zone. During daylight |
| saving time, click the [Daylight savings time currently |
| in effect] check box. |
[NTP Server] Tab ............... | Synchronize time with the NTP Server. |
| Select when to synchronize time with the NTP server |
| (on every boot up or every time clicking the |
| [Synchronize] button.) |
NOTE
•Synchronizing time at startup is effective when the 630L is connecting WTS/Web Server using a network connector on the rear.
•Getting the NTP Server information from the DHCP Server needs to satisfy the following:
*Connect the WTS/Web Server by the network connector on the rear
*Use the DHCP Server to get information such as IP address.
*Set the NTP Server option at the DHCP Server.
Click [OK] to return to the “Terminal Properties” dialog box.
Click [OK] of the “Terminal Properties” to close the “Terminal Properties” and save the settings.
6. USING THE TERMINAL PROPERTIES 93