Eizo 630L 6-4.Network Settings

English

6-4. Network Settings

Click [Network] tab to set network information for the 630L.

NOTE

•All settings shown here are previously adjusted on the “WBT Setup Wizard”.

•Please set the properties depending on the 630L connection settings.

[Use PPP connection or another network adapter]

...................................Click to use a modem connection to the WTS.

To connect to the WTS with a LAN network, set the following. [Obtain an IP address from a DHCP server]

...................................	This allows the user to receive IP information from a
	DHCP service automatically. The DHCP service of a
	server must be in operation to receive the information.
[Specify an IP address.] .......	If not using a DHCP service, please select this and
	enter the information shown below.
[IP address].........................	Type the 630L IP address.
[Subnet Mask] ....................	Type the subnet mask.
[Gateway]...........................	Type the Gateway IP address.
[Terminal Name] ................	Type a name to recognize this unit from others on the
	network. (Only in use of the RDP protocol)
[Media Type]......................	Set up the transmission speed on the network.

78 6. USING THE TERMINAL PROPERTIES