Part1 QUICK START GUIDE Part2 Part3
5 Displays
Operator display | Clerk code or mode name |
| Function message display area |
| Numeric entry display area |
Receipt OFF indicator
Repeat / Sentinel mark / Power save mark
• Clerk code or Mode name
The mode you are in is displayed. When a clerk is assigned, the clerk code is displayed in the REG or OP X/Z mode. For example, “?01?” is displayed when clerk 01 is assigned.
• Repeat mark
The number of repeats is displayed, starting at “2” and incremental with each repeat. When you have
registered ten times, the display will show “0”. (2 ➞ 3 | 9 ➞ 0 ➞ 1 ➞ 2...) |
• Sentinel mark
When amount in the drawer reaches the amount you preprogrammed, the sentinel mark “X” is displayed to advice you to remove the money to a safe place.
• Power save mark
When the cash register goes into the power save mode, the power save mark (decimal point) lights up.
• Function message display area
Item labels of departments and PLU/subdepartments and function texts you use, such as %1,
When an amount is to be entered or entered, “AMOUNT” is displayed: When an amount is to be entered,
been set with "Open & Preset" selected in department programming, the preset price is displayed at the numeric entry display area with "AMOUNT".
• Numeric entry display area
Numbers entered using numeric keys are displayed here.
Date and time display
Date and time appear on the display in the OP X/Z, REG, or MGR mode. In the REG or MGR mode, press the skey to display the date and time.
Error message
When an error occurs, the corresponding error message is displayed in the function message display area. For details of error messages, please refer “Error message table” on page 98.
Customer display (Pop-up type)
6
Drawer Lock Key
This key locks and unlocks the drawer. To lock it, turn 90 degrees counterclockwise. To unlock it, turn 90 degrees clockwise.
7
