Sharp XE-A303 S1 @, Entering character codes with numeric keys on the keyboard, 253, 065

Example 2: Job code type programming (programming starting from the press of s.)

Key operation example

Operator display

Job code entry s1 @

•Guidance message is displayed.

Parameter entry 50

Registration of parameter s

To terminate A

MACHINE NO.

0.00

MACHINE NO.

50

ENTER[TL/NS]KEY

0.00

PGM 0.00

To repeat

(depending on programming)

Guidance message is changed after a new job code entry.

Entering character codes with numeric keys on the keyboard

For entering numerals, letters or symbols, enter a character code using numeric keys and press the numeric key :. For the character codes, please refer to the alphanumeric character code table on the next page. By doing this, you can program characters other than those on the key tops. For entering numerals and letters using character keys, refer to "Using character keys on the keyboard" on page 13.

•Double-size characters can be made by entering the character code 253 or pressing the Wkey. “W” is displayed when double-size characters entry is selected as shown in the operator display example below.

•All three digits of the character code MUST be entered (even if it starts with zero).

Key operation example

253 :

Operator display

Cursor

_

01 W 032

Department code, PLU code, function number,

clerk code or logo message line number is displayed here.

065

:

_
01	W	065 Character code

Characters entered are displayed here.

=A_

01 W 032

Characters: Indicating double size character of "A"

To program the word “SHARP” in double-size characters

253 :083 :072 :065 :082 :080 :

S H A R P

50