3.Close the cable cover and lead the power cord and signal cable
into the cable holder at rear of the monitor.
* The cables are recommended to lead with slight sag for the smooth motion of the
stand.
* It's recommended to put away the signal cables into the left cable holder, and the
USB cable and power cord into the right cable holder.
4.Plug the other end of the power cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.