7. Horizontal bars of
distortion appear. [ ] Decrease the horizontal bars using the
<Phase>.
8. Letters and lines appear
blurred. [ ] Adjust the blurred lines using <Smoothing>.
9. Distortion appears like the
figure below. [ ] This happens when both composite (X-OR)
input signal and separate vertical
synchronizing signal are input. Please select
one of the two.
10.The screen is too bright
or too dark. [ ] Adjust the <Brightness> (The backlight of
the LCD monitor has a fixed life span. When
the screen becomes dark or begins to flicker,
please consult your dealer.)
11.Afterimages appear. [ ] Do you use the screen saver or timer when
displaying the same image for extended
periods of time?
[ ] Afterimages are particular to LCD monitors.
Avoid displaying the same image for
extended periods of time.
12.The screen has defective
pixels (e.g. slightly light
or dark).
[ ] This is due to the characteristics of the panel
itself, and not the LCD product.
13.Fingerprints remain on
the screen. [ ] Leaving the screen white may solve the
problem.
14.The noise appears on the
screen. [ ] Change the mode in <Signal Filter> in the
<Screen> menu.