5. Reference

5-4. Setting Range of Frequency

Depending upon your operating environment, it may be necessary to set the frequency that corresponds to your graphics board. If you install it for the first time or change environment, set the monitor.

NOTE

Refer to the manual of the graphics board.

These environment described below can be set regardless of whether or not the computer is running.

How to set

1

2

3

Press to turn off the unit.

Press again while pressing .

Select the input signal using the in the <Signal Selection> menu at the center of the monitor.

Use to select (or just confirm) the frequency that corresponds to your graphics board, and then press .

[Analog Input]

Setting

Horizontal scanning frequency

Vertical scanning frequency

 

(kHz)

(Hz)

Normal

24~94

47~86

Wide

24~130

47~120

[Digital Input (DVI/DisplayPort)]

Setting

Horizontal scanning frequency

Vertical scanning frequency

 

(kHz)

(Hz)

Normal

31~76

59~61

Wide

26~78

23~63

4 Restart the computer if the settings have been changed.

29

Page 29
Image 29
Eizo CG242W user manual Setting Range of Frequency, How to set