Procedure

1)First, make the appropriate settings for the PC.

2)Select "On" in the "PowerManager" menu.

Power saving method of VESA DPMS and the monitor

VESA DPMS utilizes four signals: ON, STAND-BY, SUSPEND, and OFF. The monitor detects these signals from the graphics board and executes power-saving accordingly, as shown in the table below.

Signal

Screen

LED

Power consumption

ON

Operation

Green

130 W (normal)

STAND-BY

Blank

Green

80% of normal

 

 

 

 

SUSPEND

Blank (Mode 1)

Flashing green

less than 10 W

OFF

Blank (Mode 2)

Yellow

less than 3 W

 

 

 

 

2.Power-save Setup (To set the period in which the monitor will be in operation)

The Off Timer function allows the user to set the time in which the monitor will be in operation, called the “On Period” and automatically shifts the operation into the “Off Timer Mode” when the set “On Period” expires. The energy consumption of the monitor in the “Off Timer Mode” is as low as the one of the monitor in “PowerManger Mode 2” although no setting PC to operate the Off Timer function is required.

Procedure

1)Select the “Off Timer” icon. Select "Enable" and press the enter key.

2)Press the right/left key to adjust how long (0 to 23 hours) the monitor should be in the “On Period”. Choosing 0 disables the "Off Timer".

Advance notice (LED flashing green) will be given 15 minutes before the monitor automatically enters the “Off Timer Mode”.

·To delay entering the “Off Timer Mode”, press any keys on the front panel located to the left of the power switch during the “Advance notice Mode”. The monitor will continue to operate for an additional 90 minutes. There will be another advance notice for 15 minutes as described. Delayed entrance into the “Off Timer Mode” can be extended as many times as desired.

20 2 SCREEN ADJUSTMENT