If signals from both inputs are present, the monitor gives preference to

 

 

 

 

 

D-Sub for the cases shown below:

 

E

 

D-Sub

• When the power of the monitor is turned ON.

 

 

 

 

• When the signal input to D-Sub is changed even if active input was

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BNC.

 

 

 

 

 

 

 

 

 

 

 

If signals from both inputs are present, the monitor gives preference to

 

 

 

BNC

BNC for the cases shown below:

 

 

 

• When the power of the monitor is turned ON.

 

 

 

 

 

• When the signal input to BNC is changed even if active input was

 

 

 

 

 

D-Sub.

 

 

 

 

 

 

 

 

 

Manual

The monitor will not detect signals automatically in this mode. Select

 

 

 

the active input by pressing the input signal selection button on the

 

 

 

 

 

monitor’s front panel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

·The Input Priority function does not automatically reactivate when the monitor has been in the power saving mode.

·The Input selection button on the front panel can be used to select either D-Sub or BNC as the active input at any time.

The adjustment data in each input mode

The adjustment data for the following menu can be saved in each input mode.

- Screen Adjustment:

Contrast, Brightness

(page 11)

- Color Adjustment:

Custom Mode (page 15)

- Others:

Fine Contrast (page 18)

 

Signal Filter

1

(page

21)

 

Signal Filter

2

(page

21)

3 D-SUB AND BNC INPUT 25