3 D-SUB AND BNC INPUT

Connecting two PCs to the monitor

1)Be sure that the monitor and the PC are both switched off before connecting them.

2)Connect one PC to the monitor’s D-Sub connector and another to the BNC connector securely. The BNC connection should be made with an EIZO BNC cable, available as an option. Contact EIZO dealers for information about optional cables.

(Example)

MD-C53A (optional)

Selecting the active input

The BNC/D-Sub selection button on the front panel can be used to select either BNC or D-Sub connection as the active input.

The ScreenManager’s “Input Priority” setting can be used to set up the automatic selection of the input. See the below for details.

To set priority input signal

Whenever a change of signal is detected at the selected input, the monitor will switch the input to that signal.

Procedure

1)Select “Input Priority”.

2)Select “Auto” by top/down arrow keys and select the connector in which the prior signal is input.

24 3 D-SUB AND BNC INPUT