27
Chapter2AdjustingScreens
● Digital Input (HDMI: video signal)
The screen size can be changed with the “Screen Size” function.
Setting Function Screen Display
Auto Themonitorautomaticallychangesthescreen
sizeaccordingtotheaspectratioandresolution
informationfromtheexternaldevice.Thiscanbeset
onlyforHDMI(SDSignal)input.
FullScreen Displaysanimageinfullscreen.Imagesare
distortedinsomecasesbecausetheverticalrateis
notequaltothehorizontalrate.
Enlarged Displaysanimageinfullscreen.Insomecases,
ablankhorizontalorverticalborderappearsto
equalizetheverticalrateandthehorizontalrate.
Letterbox DisplaysLetterboxof16:9infullscreen.Exceptfor
Letterbox,theupperandlowerpartsoftheprojected
imagearecut.ThiscanbesetonlyforHDMI(SD
Signal)input.
Normal*1 Theimageisdisplayedwithoutscalingtheinput
signals.
*1When“ScreenSize”is“Normal”,“Overscan”isxedat“Off”.
Procedure
1. Press on the remote control.
Each time you press , the size changes.
Attention
• Selecting “Normal” may make some color gradations unavailable for display.

To set the screen ratio “Overscan”

In order to hide distortion or noise at the image’s edge, the display area of the input image can be changed so
that peripheral images are not displayed.
Setting Function
On Displaysaninputimageinthescreenbytrimmingtheverticalandhorizontalpartsofthe
image.
Off Displaysmostoftheinputimage.
Procedure
1. Press on the remote control.
The “Screen Size” menu appears.
2. Select “Overscan” with .
3. Use or for adjustment.
4. Press to exit the adjustment.
Attention
• When “Screen Size” is “Normal”, “Overscan” is xed at “Off”.