Eizo FS2331 Imaging problems for analog only, Use Position in the Setting menu to correct

Imaging problems (for analog only)

	Problem		Possible cause and remedy
12. Display position is incorrect.		•	Use “Position” in the Setting menu to correct the
			image position (see “To correct the screen position
			“Position”” (page 25)).
		•	If the problem persists, use the graphics board’s utility
			if available to change the display position.

13.Vertical bars appear on the screen or a • Use “Clock” in the Setting menu to adjust it (see “To

part of the image is flickering. eliminate vertical bars “Clock”” (page 24)).

14. Whole screen is flickering or blurring.

•Use “Phase” in the Setting menu to adjust it (see “To remove flickering or blurring “Phase”” (page 24)).

Chapter 6 Troubleshooting 39