English

Cable Holder

4. Plug the other end of the power cord into a power outlet.

WARNING

Use the enclosed power cord and connect to the standard power outlet of your country.

Be sure to remain within the rated voltage of the power cord.

Not doing so may result in fire or electric shock.

The equipment must be connected to a grounded main outlet.

Not doing so may cause in fire or electric shock. Not doing so may result in fire or electric shock.

5. Turn on the monitor's main power and then switch on the PC's power.

The monitor’s power indicator will light up (green).

If an image does not appear, refer to the “8. TROUBLESHOOTING” (p.32) for advice.

Whenever finished, turn off the PC and the monitor.

NOTE

When turning on the monitor, the kind of the input signal (Analog or Digital) is displayed for a few seconds on the right top corner of the screen.

Adjust brightness of the screen depending on the brightness of your environment.

Be sure to take adequate rests. A 10-minute rest period each hour is suggested.

2. CABLE CONNECTION 15