
English
8. TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
•No picture problems → See No.1 ~ No.2
•Imaging problems → See No.3 ~ No.13
•Other problems → See No.14 ~ No.17
•USB problems → See No.18 ~ No.19
| Problems | Points to check with possible solutions | |
| 1. No picture | ! Check that the power cord is correctly connected. | |
| • Indicator status: Off | If the problem persists, turn off the monitor power | |
| for a few minutes, then turn it back on and try | ||
|
| ||
|
| again. | |
| • Indicator status: Green | ! Check the “Brightness” settings. | |
| • Indicator status: Orange | ! Try pressing a key on the keyboard, or clicking the | |
|
| mouse. | |
|
| (p.25) | |
| • Indicator status: Slowly flashing | ! Try pressing the power button. | |
| Orange |
|
|
| • Indicator status: Flashing Orange | ! Try turning the PC on. | |
| (twice for each) |
|
|
|
|
|
|
| 2. Error messages shown below will | These messages appear when the signal is not inputted | |
| remain on the screen for 40 | correctly, even if the monitor functions properly. | |
| seconds. | ! When the image is displayed correctly after a short | |
|
| time, there is no problem with the monitor. (Some | |
|
| PCs do not output the signal soon after powering | |
|
| on.) | |
|
| ! Check that the PC is turned ON. | |
|
| ! Check that the signal cable is properly connected to | |
|
| the PC or graphics board. | |
|
|
|
|
| • Whenever an error signal message | ! Use the graphics board’s utility software to change | |
| appears, the signal frequency will be | the frequency setting. (Refer to the manual of the | |
| displayed with blinking. | graphics board.) | |
| (Example: Digital input) |
|
|
|
|
|
|
|
|
|
|
32 8. TROUBLESHOOTING