English

 

 

 

 

 

 

 

 

 

 

Problems

Points to check with possible solutions

 

3. Display position is incorrect.

! Adjust the image position using the <Position>

 

 

 

 

 

(p.21) If the problem persists, use the graphics

 

 

 

 

 

board’s utility software to change the display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

position if available.

 

 

 

 

 

 

 

4.

Screen image is smaller or larger

! Adjust the resolution using the <Resolution> (p.21)

 

than the actual screen images.

 

 

 

 

5.

Vertical bars of distortion appear.

! Decrease the vertical bars using the <Clock>. (p.20)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.Horizontal bars of distortion appear. ! Decrease the horizontal bars using the <Phase>. (p.20)

7. Letters and lines appear blurred.

! Adjust the blurred lines using <Smoothing> (p.23)

8.The slightly shadowed images or characters appear.

Bright vertical bars on the right side of ! Change the mode in the <Signal Filter>.

the characters and images

! This problem may appear in case of connecting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

some analog graphics board.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9. Distortion appears like the figure

! This happens when both composite (X-OR) input

below.

signal and separate vertical synchronizing signal are

 

input. Please select one of the two.

8. TROUBLESHOOTING 33