Eizo L362T 2-3.Connecting two PCs to the monitor, 2-4.Sound Connections

English

2-3. Connecting two PCs to the monitor

Two PCs can be connected to the monitor through the DVI and the D-Sub mini 15 pin connector on the back of the monitor.

Selecting the active input

The Input Signal Selection Button on the control panel can be used to select either Signal 1 or Signal 2 as the active input at any time. Every time the button is pressed, the input changes. When switching the signal, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed for a few seconds on the right top corner of the screen.

Input Signal Selection Button

SIG. AUTO ENT.

2-4. Sound Connections

NOTE

ξ Always switch the monitor and audio devices or computers off whenever connecting or disconnecting any audio devices (computer or CD player) to the monitor.

ξ Use the enclosed stereo mini-jack cable for connecting audio devices or computers to the monitor.

1. Connect the stereo mini-jack cable to the external line in of the monitor.

2. Connect the other side of stereo mini-jack cable to the line out of audio devices.

	Computer or
	CD Player
Volume control
Volume control	Press the Right and Left Buttons.
Mute	Press the Up or Down Button for a while after pressing the Right or Left
	Button to display the volume control bar.
Mute off	Press the Right or Left Button.

NOTE

ξ <Sound> menu of the ScreenManager also controls the sound.

2. CABLE CONNECTION 15