English

5. ATTACHING AN ARM

The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm or stand to the LCD monitor.

Using our optional arm or stand is recommended. (Ask your local dealer for information.)

NOTE

ξ If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting.

-Hole spacing on the arm mounting: 75 mm x 75 mm (VESA compliant)

-Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such as a cable

-TÜV/GS approved arm or stand

ξ Please connect cables after attaching an arm stand.

Setup Procedure

1. Lay the LCD monitor down. Do not scratch the panel.

2. Remove the tilt stand by loosening the screws (2 pcs of M4 x 10 mm).

3. Attach an arm stand to the LCD monitor securely.

Arm-stand

4 Mounting Screws (enclosed): M4 x 12 mm

28 5. ATTACHING AN ARM