Eizo L362T 4-2.Color Adjustment

English

4-2. Color Adjustment

The <Color> menu in the ScreenManager enables to change the color of the screen. By using the <Color Mode>, the adjustment mode can be selected from <Custom mode> (to adjust the color settings according to your preference) and <sRGB> mode.

In the analog input, perform the “Range Adjustment” (p.22) before making the color adjustments.

NOTE

ξ Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. (Allow the monitor to warm up for at least 20 minutes before making adjustments.)

ξ Performing the <Reset> of the <Color> menu returns the color settings to the default settings

ξ The values shown in percentages represent the current level within the specific adjustment. They are available only as a reference tool. (To create an uniform white or black screen, the percentages for each will probably not be the same.)

Adjustment Contents

Menu	Color Mode		Function Descriptions	Adjustable range
	Custom	sRGB
Brightness	—	—	To set the brightness of the	0 α 100%
			screen
Temperature	—	-	To set the color temperature	4,000 α 10,000 K
(p.37)				in 500 K increments
				(including 9,300 K).
				Default setting is off
				(normal white)
			NOTE
			ξ The values shown in the Kelvin are available only as a
			reference tool.
			ξ Setting the temperature under 4,000 K or over 10,000
			K invalidates the color temperature setting. (The color
			temperature’s setting turns “OFF”.)
Gamma	—	-	To set the gamma value	1.8 α 2.6
(p.38)
			NOTE
			ξ If setting the gamma value, the using the monitor in
			the digital signal input is recommended.
			If using the monitor in the analog input signal, set the
			gamma value from 1.8 to 2.2.

24 4. ADJUSTMENT