
English
2-2. Connecting the signal cable
NOTE
•Be sure that the Power buttons of both the PC and the monitor are OFF.
1. Set up the monitor after unfolding the base of the stand.
NOTE
• How to adjust Angles of the Monitor
Grip upper side of the monitor firmly with both hands and adjust the monitor angle as desired.
2. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the
Analog Input
Power Cord
Signal Cable | Connector | PC |
Signal Cable (enclosed) | Video Output | • Standard graphics card |
| Connector | • Macintosh G3 (Blue & White) / |
| mini 15 pin | |
| Power Mac G4 (VGA) | |
|
| |
Signal Cable (enclosed) + | Video Output | • Macintosh |
Macintosh Adapter (Optional) | Connector |
|
| 15 pin |
|
Digital Input
Power Cord
Signal Cable | Connector | PC |
Video Output | • Power Mac G4 (DVI) | |
(Optional) | Connector DVI | • Digital graphics card |
|
|
NOTE
•The monitor is not compatible with a Power Mac G4/G4 Cube ADC (Apple Display Connector).
2. CABLE CONNECTION 13