
English
3. Plug the power cord into the power connector on the rear of the monitor. Then, plug the other end of the cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the standard power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.
4. Turn on the monitor's main power and then switch on the PC's power.
The monitor’s power indicator will light up (blue).
If an image does not appear, refer to the “6. TROUBLESHOOTING” (p. 23) for advice.
Whenever finished, turn off the PC and the monitor.
NOTE
•When turning on the monitor and the computer for the first time, the Auto Screen Adjustment function will operate. (p. 18)
•Adjust Brightness of the screen depending on the brightness of your environment. Too dark or too bright of a screen can cause eyestrain. (p. 19)
•Be sure to take adequate rests. A
2-3. Connecting two PCs to the monitor
Two PCs can be connected to the monitor through the
Selecting the Active Input
Pressing the left control button without displaying the ScreenManager changes input signal. When switching the signal, the kind of the input signal (Analog or Digital) is displayed for a few seconds on the right top corner of the screen. When the one computer is switched off or entering the power saving mode, the monitor will automatically display the other signal.
Left Control Button
14 2. CABLE CONNECTION