English

2-2. Connecting the signal cable

NOTE

ξ Be sure that the power switches of both the PC and the monitor are OFF.

1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.

After connecting, secure the connection with the screw-in fasteners.

Digital Signal Input Connecter Analog Signal Input Connecter

3. Power Cord

1. Signal Cable

2. Touch Panel Cable

Analog Input

 

 

 

Signal Cable

Connector of PC

 

PC

Signal Cable (enclosed, MD-

Video Output

ξ Standard graphics card

C87)

Connector/ D-Sub

 

 

 

mini 15 pin

 

 

 

Input Connecor

 

 

 

(monitor)/ D-Sub

 

 

 

mini 15 pin

 

 

Digital Input

 

 

 

Signal Cable

Connector of PC

 

PC

FD-C39 (Optional)

Video Output

ξ Digital Graphics card

 

Connector DVI-I

 

 

 

Input Connecor

 

 

 

(monitor)/ DVI

 

 

2. Plug the enclosed touch panel cable (FD-C38) into the RS-232C port of the monitor. Then, plug the other end of the cable into the COM port of the PC.

2. CABLE CONNECTION 13