
|
| English |
ξ | Other problems |
|
|
|
|
| Problems | Points to check with possible solutions |
| 10.The <Smoothing> cannot be | <Smoothing> is disabled when the screen is |
| selected. | displayed in the 1280 x 1024. |
|
|
|
| 11.The Enter Button does not | The adjustment lock is probably on. To unlock: |
| operate. | switch the LCD monitor off. Then, while |
|
| pressing the Auto Adjustment Button switch, |
|
| the power on. (p.18) |
| 12.The Auto Adjustment Button does | The adjustment lock is probably on. To unlock: |
| not operate. | switch the LCD monitor off. Then, while |
|
| pressing the Auto Adjustment Button switch, |
|
| the power on. (p.18) |
|
| The Auto adjustment function is intended for |
|
| use on the |
|
| It may not work properly in either of the |
|
| following cases. |
|
| ξ When running an |
|
| DOS (Not windows). |
|
| ξ The background color for the “wall paper” |
|
| or “desktop” pattern is set to black. |
|
| Some signals from a graphics board may not |
|
| function properly. |
ξ | Touch Panel Problems |
|
|
|
|
| Problems | Points to check with possible solutions |
| 13.Cursor is jittery. / Drawing lines | The influence of metal may cause jittery cursor. |
| are not straight and smooth. | Using the monitor with |
|
| may cause jittery cursor. |
|
| Run the Stabilize Cursor option from the |
|
| TouchWare. |
| 14.Continuous touch sound./ | Check the baud rate for the touch panel on |
| Much time requirement for | TouchWare. The baud rate of 1200 bps may |
| executing touch screen | cause continuous touch sound or much time |
| calibration or cursor stabilization. | requirement for executing touch screen |
|
| calibration or cursor stabilization. |
|
|
|
6. TROUBLESHOOTING 29