English
5. ATTACHING A STAND
The LCD monitor can be used with other stand by removing the tilt stand and attaching the stand to the LCD monitor.
NOTE
ξ If you will use the other stand, confirm the followings to the manufacturers before selecting.
-Hole spacing on the stand mounting: 100 mm x 100 mm (VESA compliant)
-Supportable Weight: Total weight of the monitor (without stand) and attaching equipment such as a cable
-TÜV/GS approved stand
ξ Please connect cables after attaching a stand.
Setup Procedure
1. Hold the center of the stand mounting cover and slide them rightward or leftward to remove the mounting cover.
Stand mounting cover
2.
3.
Lay the LCD monitor down. Do not scratch the panel.
Remove the tilt stand by loosening the 4 screws.
5. ATTACHING A STAND 25