Signal Cable (FD-C39 enclosed)

 

Video Output Connector/ DVI

 

Digital graphics board

 

 

 

 

Power Mac G4/G5 (DVI)

 

 

Input Connector (monitor) / DVI

 

 

 

 

 

 

 

The monitor is not compatible with a Power Mac G4/G5 ADC (Apple Display Connector).

2.Plug the power cord into the power connector on the rear of the monitor. Then, plug the other end of the cord into a power outlet.

Use the enclosed power cord and connect to the standard power outlet of your country.

Be sure to remain within the rated voltage of the power cord.Not doing so may result in fire or electric shock.

The equipment must be connected to a grounded main outlet.

Not doing so may result in fire or electric shock.

3. Adjust the "height", "front and back position" and "angle" of the monitor.

Grip both side of the center part of the monitor and move slowly (refer to the right figure.)

(1)Adjust the height of the monitor. To heighten, push the monitor backward. To lower, pull the monitor forward.

(2)Adjust the position and angle of the monitor.(3)If necessary, fine adjust the height of the monitor.4. Turn on the monitor's Power button and then turn on the PC's power.

The monitor's power indicator will light up (blue).

If an image does not appear, refer to the 7. TROUBLESHOOTING for advice.

Whenever finished, turn off the PC and the monitor.

When turning on the monitor, the kind of the input signal (Signal 1 or 2/Analog or Digital) is