Selecting the Active Input

The Input Signal Selection Button on the control panel can be used to select either DVI or D-SUB as the active input at any time. Every time the button is pressed, the input changes. When switching the signal, the kind of the input signal (Analog or Digital) is displayed for a few seconds on the right top corner of the screen.

●The sound from the speaker is also switched when switching the input signal.

2-4. Sound Connections

●Always switch the monitor and audio devices or computers off whenever connecting or disconnecting any audio devices (computer or CD player) to the monitor.

●Use the enclosed stereo mini-jack cable for connecting audio devices or computers to the monitor.

1.Connect the stereo mini-jack cable to the external line in of the monitor.

2. Connect the other side of stereo mini-jack cable to the line out of audio devices.

Sound control

Audio performance is available by connecting the headphone to the Headphone jack (When headphones are connected, no sound can be heard from the speakers).