Whenever an error signal message appears, the signal frequency will be displayed in red.

(Example)

3.Display position is incorrect.4.Vertical bars of distortion appear.5.Horizontal bars of distortion appear.6.Letters and lines appear blurred.7.The screen is too bright or too dark.8.Afterimages appear.9.The screen has defective pixels (e.g. slightly light or dark).10.Fingerprints remain on the screen.

Use the graphics board's utility software to change the frequency setting. (Refer to the manual of the graphics board.)

Adjust the image position using the <Position>.

If the problem persists, use the graphics board's utility software to change the display position if available.

Decrease the vertical bars using the <Clock>.

Decrease the horizontal bars using the <Phase>.

Adjust the blurred lines using <Smoothing>.

Adjust the <Brightness> (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer.).

Do you use the screen saver or timer when displaying the same image for extended periods of time?

Afterimages are particular to LCD monitors. Avoid displaying the same image for extended periods of time.

This is due to the characteristics of the panel itself, and not the LCD product.

Leaving the screen white may solve the problem.