displayed for a few seconds on the right top corner of the screen.

Adjust brightness of the screen depending on the brightness of your environment. The

"BrightRegulator function" enables to adjust the brightness of the screen automatically depending on the surrounding brightness.

Be sure to take adequate rests. A 10-minute rest period each hour is suggested.

Bright Regulator Function

BrightRegulator function adjusts the brightness of the screen automatically depending on the surrounding brightness. The brightness of backlight is adjusted as the sensor on the upper side of the monitor detects the surrounding brightness (Default: this function is set "Disable".)

[How to switch the setting]

1.Push the BrightRegulator Button on the contol panel.

2.The current setting will be appear on the left corner of the screen. During the appearance, pushing the BrightRegulator button allows you to change the setting.

Do not block the sensor when using this function.

ScreenManager Pro for LCD

When using the software, ScreenManager Pro for LCD (for Windows), connect the upstream port of the monitor to the downstream port of the USB compliant PC or another hub with the USB cable.

After connecting the USB cable, the USB function can be set up automatically. For further details about the "ScreenManager Pro for LCD", refer to the readme.txt in the CD-ROM.

2-3. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI and the D-Sub mini 15 pin connector on the back of the monitor.