Design LED 12 Brick II ™
©Elation Professional, Los Angeles Ca. 16 www.ElationLighting.com
4™ or DMX Branch/4™.
Please note: to ensure maximal stability, only two devices may be connected together in
this manner! From the third devices, please connect to power supply to get power for the
second link.
DMX-512 connection with DMX terminator
When longer runs of cable are used, you may need to use a terminator on the last fixture to
avoid erratic behavior. A terminator is a 120 ohm 1/4 watt resistor that is connected between
pins 2 and 3 of a male XLR connector (DATA + and DATA -). This fixture is inserted in the
female XLR connector of the last fixture in your daisy chain to terminate the line. Using a
cable terminator (Elation part number Z-DMX/T) will decrease the possibilities of erratic
behavior.