|
|
|
|
| Design LED 12 Brick II ™ | |
|
|
|
|
|
|
|
|
| FADE | XXX | Adjust speed of fade |
| |
|
|
|
|
|
|
|
|
| STRB | XXX | Adjust speed of strobe |
| |
| CHS7 | SPED | XXX | Adjust speed of scene |
| |
| FADE | XXX | Adjust speed of fade |
| ||
|
| STRB | XXX | Adjust speed of fade |
| |
| CHS8 | SPED | XXX | Adjust speed of scene |
| |
| FADE | XXX | Adjust speed of fade |
| ||
|
| STRB | XXX | Adjust speed of fade |
| |
SOND | CTRL | MAST |
|
| ||
| ALON |
|
| |||
MIC |
| Microphone sensitivity |
| |||
| <DIMR> | MOD1 |
|
| Select standard dimmer |
|
OTHR |
| MOD2 |
| Select weak dimmer |
| |
|
|
|
| Reset to Fixture to the Factory Default |
| |
|
|
|
|
|
| |
| <LOAD> | yes |
| Settings |
| |
| <VER> | V X.X |
| Show the version |
| |
Remark:
1)If there is no DMX data received in the device, the display will flash.
2)Instruction for the SPED and the FADE function in CHAS: SPEED: The time one step would stay
FADE: The time that one step altered to next step
Example: we set SPEED ==1second, and FADE ==1second, the 1st step is Red 100% open, the 2nd step is green 100% open, the 3rd step is Blue 100% open. So, the Chase would come out as:
1, The Red 100% open and stay for 1second (SPEED)
2, Then Red drop down from 100% to 0%, the same time Green from 0% to 100%, in 1second (FADE)
3, The Green stay 100% for 1second
4, Then Green drop down from 100% to 0%, the same time Blue from 0% to 100%, in 1second (FADE)
5, Blue stay 100% for 1 second.
6, Then Blue drop down from 100% to 0%, the Red come up from 0% to 100% Repetition operation
©Elation Professional, Los Angeles Ca. | 20 | www.ElationLighting.com |
