Design Wash 1400E™
©Elation Professional® 51 Design Wash 1400E™
16. FUSE REPLACEMENT Caution: Always replace with the exact same type fuse, unless otherwise specified by an
authorized Elation® service technician. Replacing with anything other than the specified part
can damage your unit and will void your manufactures warranty.
Warning: If you continue to blow fuses, STOP using the fixture. Contact customer support
for further instructions, you may have to return the unit for servicing. Continuing to use the
unit may cause serious damage.
Fuse Replacement: Locate and remove the unit’s power cord from the main power supply.
Once the cord has been removed located the fuse holders located on the side panel near
the power input connection. Using a flat-head screwdriver unlock the fuse holder from its’
housing by turning the holder in a counter-clockwise direction. Once the fuse holder has
been unlocked, pull back on the fuse holder to expose the fuse. Gently pull out the bad fuse
and discard of it properly and replace it with an exact match. Reassemble in reverse order.