- Display the DMX-value, Reverse display, Shut off LED display

- Display the DMX 512 value of each channel

With this function you can display the DMX 512 value of each channel.

1.Select "VALU" by pressing [UP] or [DOWN] button.

2.Press [ENTER] to confirm; the display shows“D-00”. In this setting, the DMX-adjustment of every channel will be displayed.

3.Press [UP] or [DOWN] button in order to select the desired channel. If you select “D-14”the display will only show the DMX-value of the 14th channel.

4.Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

5.The display shows "D- XX“, ”X” stands for the DMX-value of the selected channel.

- Reverse display

With this function you can rotate the display by 180°.

1.Select "RDIS" by pressing [UP] or [DOWN] button.

2.Press [ENTER], the display shows “ON” or “OFF”.

3.Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you don’t; the display will rotate by 180°.

4.Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

- Shut off LED display

With this function you can shut off the LED display after 2 minutes.

1.Select "CLDI" by pressing [UP] or [DOWN] button.

2.Press [ENTER], the display shows “ON” or “OFF”.

3.Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to “OFF” if you don’t.

4.Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

- Main menu 1

1.Press [MODE/ESC] to enter the main menu (display flashing).

2.Press [UP] or [DOWN] button to select “LAMP”.

- Lamp on/off

With this function you can switch the lamp on or off via the Control Board. 1. Select “OPEN” by pressing [UP] or [DOWN] button.

12 DESIGN WASH 250 USER MANUAL V1.0 NR

Page 13
Image 13
Elation Professional 250 user manual Reverse display, Shut off LED display, Lamp on/off