Elation Professional 700 II TEMP, FANS

Power Spot 700 II™

©Elation Professionals® Lo s Angeles, Ca. - wwww.ElationLig hting.com - Page 30

8.9.6 Fixture Temperature

TEMP

This function allows you to read out the actual fixture operating temperature.

Press the Enter button to select this function or the Mode to button to cancel

and return to the main menu. Normal operating temperature should range

between 85˚C and 95˚C. Operating temperatures between 96˚C and 104˚C

are considered critical. Temperatures above 105°C will send the fixture into

protect mode and automatically switch the lamp off, the lamp will remain off

until internal temperature drops below 95˚C. Outside surface temperature

should not exceed 45˚C.

8.9.7 Fan Control

FANS

By using this function you can choose between 4 types of fan speed

operations. Use the Up and Down buttons to select the desired fan setting,

then press Enter to accept your setting or press the Mode button to cancel

and return to the menu. The chart below will detail the different fan settings:

The cooling fan works continuously at max. speed.

This is the default fan setting. In this setting an internal thermal

sensor constantly monitors the internal operating temperature

and regulates the fan speed to coincide with the internal

temperature.

This function is designed for environments that require low

ambient noise. In this setting the fan will operate at the lowest

speed. When the maximum internal intolerable operating

temperature is reached the lamp will automatically shut off.

In this setting the fan will operate at the lowest speed. When the

maximum internal intolerable operating temperature is reached

the fan will automatically switch from low to high speed.