w w w . e l a t i o n l i g h t i n g . c o m !

FuncMode - SetSlave

Define the fixture as slave.

1Access the main menu by pressing MODE/ESC.

2Press the UP/DOWN buttons until “FuncMode” is displayed and press ENTER.

3Press the UP/DOWN buttons until “SetSlave” is displayed and press ENTER.

4Press the UP/DOWN buttons to select desired value (Slave 1, Slave 2, Slave 3).

5Press ENTER to confirm selection.

FuncMode - AutoProg

Define the fixture mode (= Master, = Alone) for running Auto Programs. Select the desired internal programs under “Sel Prog”, set the number of steps under “Edit Prog”, and edit the individual scenes under “Edit Scen”.

1Access the main menu by pressing MODE/ESC.

2Press the UP/DOWN buttons until “FuncMode” is displayed and press ENTER.

3Press the UP/DOWN buttons until “AutoProg” is displayed and press ENTER.

4Press the UP/DOWN buttons to select desired value (=Master, =Alone).

5Press ENTER to confirm selection.

Info - TimeInfo - Cur Time

Display the run time of the fixture from the last power ON.

The counter is reset after turning the device off.

1Access the main menu by pressing MODE/ESC.

2Press the UP/DOWN buttons until “Info 2” is displayed and press ENTER.

3Press the UP/DOWN buttons until “TimeInfo” is displayed and press ENTER.

4Press the UP/DOWN buttons until “Cur Time” is displayed and press ENTER and the display will show “XXXh” (hours).

5Press MODE/ESC to return to previous menu or display will automatically exit.

! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 21! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! LEVEL!Q7!IP™!User!Manual!1.0