w w w . e l a t i o n l i g h t i n g . c o m !

EditProg - EditScen

Edit the scenes of the internal programs.

1Access the main menu by pressing MODE/ESC.

2Press the UP/DOWN buttons until “EditProg” is displayed and press ENTER.

3Press UP/DOWN buttons until “EditScen” is displayed and press ENTER.

4Press UP/DOWN buttons to select desired Scene number (Scen001-Scen250), and press ENTER to confirm selection.

5Press UP/DOWN buttons to select desired function (Auto, Red, Gree, Blue, Whit, Stro, Dimm, Macr, Temp, ScenTime, InByOut), and press ENTER to confirm selection.

6Press UP/DOWN buttons to select desired value (001-250)and press ENTER to confirm selection.

7Press MODE/ESC to return to previous menu or display will automatically exit.

EditProg - RecCntrl

This fixture features an integrated DMX-recorder by which you can transmit the programmed scenes from your DMX-controller to the moving head. Adjust the desired scene numbers via the encoder (from – to). When you call up the scenes at your controller, they will automatically be transmitted to the moving head.

EditProg - RecCntrl - Execution

A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start 3 different Slave units, which run 3 different programs. The Master unit sends the 3 program parts in a continuous loop.

The Slave unit receives data from the Master unit according to the group which the Slave unit was assigned to. If e.g. a Slave unit is set to “Slave 1” in the menu “Set to Slave”, the Master unit sends “Auto Program Part 1” to the Slave unit. If set to “Slave 2”, the Slave unit receives “Auto Program Part 2”.

! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 28! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! LEVEL!Q7!IP™!User!Manual!1.0