w w w . e l a t i o n l i g h t i n g . c o m !

Persnal - Stat Set - Addr DMX

Adjust the desired DMX address via an external controller, default is ON.

1Access the main menu by pressing MODE/ESC.

2Press the UP/DOWN buttons until “Persnal” is displayed and press ENTER.

3Press the UP/DOWN buttons until “Stat Set” is displayed and press ENTER.

4Press the UP/DOWN buttons until “Addr DMX” is displayed and press ENTER and the display will show (=OFF, =ON).

5Press the UP/DOWN buttons to select (=OFF or =ON) and press ENTER.

6Press MODE/ESC to return to previous menu or display will automatically exit.

Persnal - Stat Set - NoDMXSta

Fixture runs in Auto Run if no DMX signal is detected. Options include (=Hold, =Auto, =CloShut), default is =Hold.

1Access the main menu by pressing MODE/ESC.

2Press the UP/DOWN buttons until “Persnal” is displayed and press ENTER.

3Press the UP/DOWN buttons until “Stat Set” is displayed and press ENTER.

4Press the UP/DOWN buttons until “NoDMXSta” is displayed and press ENTER.

5Press the UP/DOWN buttons to select desired value (=Hold, =Auto, =CloShut), and press ENTER to confirm selection.

6Press MODE/ESC to return to previous menu or display will automatically exit.

Persnal - Disp Set - Off Time

Shut off the LED display after 02 to 59 minutes, default is 05 minutes.

1Access the main menu by pressing MODE/ESC.

2Press the UP/DOWN buttons until “Persnal” is displayed and press ENTER.

3Press the UP/DOWN buttons until “Disp Set” is displayed and press ENTER.

4Press the UP/DOWN buttons until “Off Time” is displayed and press ENTER.

5Press the UP/DOWN buttons to select desired value (=OFF, 02-59), and press ENTER to confirm selection.

6Press MODE/ESC to return to previous menu or display will automatically exit.

!! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 24! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! LEVEL!Q7!IP™!User!Manual!1.0