w w w . e l a t i o n l i g h t i n g . c o m !

Info - TimeInfo - Clr Last

Clear last run time of the fixture, default is OFF.

1Access the main menu by pressing MODE/ESC.

2Press the UP/DOWN buttons until “Info” is displayed and press ENTER.

3Press the UP/DOWN buttons until “TimeInfo” is displayed and press ENTER.

4Press the UP/DOWN buttons until “Clr Last” is displayed and press ENTER and the display will show (=OFF, =ON).

5Press the UP/DOWN buttons to select (=OFF or =ON) and press ENTER to clear last run time. NOTE: A correct password must be entered in the TImePass menu in order to clear last run time.

6Press MODE/ESC to return to previous menu or display will automatically exit.

Info - TempInfo - HeadTemp

Display the temperature of the fixture, default is Fahrenheit.

1Access the main menu by pressing MODE/ESC.

2Press the UP/DOWN buttons until “Info” is displayed and press ENTER.

3Press the UP/DOWN buttons until “TempInfo” is displayed and press ENTER.

4Press the UP/DOWN buttons until “HeadTemp” is displayed and press ENTER and the display will show “=XXXF” (degrees) °C / °F.

5Press MODE/ESC to return to previous menu or display will automatically exit.

Info - Soft Ver

Display the software version of the fixture.

1Access the main menu by pressing MODE/ESC.

2Press the UP/DOWN buttons until “Info” is displayed and press ENTER.

3Press the UP/DOWN buttons until “Soft Ver” is displayed and press ENTER and the display will show “= VX.X”. (software version #)

4Press MODE/ESC to return to previous menu or display will automatically exit.

! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 23! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! LEVEL!Q7!IP™!User!Manual!1.0