Ele 88-0210/02 (L-5C), 88-0200/02 (L-3C), 88-0220/01 (L-8C-4), 88-0200/01 (L-3C-4) International

International

B.Models 88-0210/ (L-5C), 88-0220/01 (L-8C)

1.Switch on the ON/OFF power switch.

2.Turn the thermostat knob to the desired temperature indicated on the knob. A slight adjustment may be necessary but this can be determined by the thermometer reading.

C.Due to latent heat of the element(s) on initial warm-up, it is best to anticipate temperature rise at this point. Until the user becomes familiar with the equipment through use, one should set the thermostat so that it will cycle 10 to 20 degrees ahead of the desired operating temperature to dissipate the excessive heat of the element(s). The higher the desired temperature, the less anticipation is needed. The thermostat should be allowed to cycle at temperature a few times before using the oven. This will allow the interior metal of the oven to reach temperature and stabilize at operating temperature.

D.Load the oven so that air circulation within the oven is not impaired. General guidelines include:

￿Stagger articles on the shelves.

￿Do not overload. Overloading will show by non-uniform processing.

￿Leave a space between articles being processed.

￿Hang flat sheet from top shelf.

￿If sheets are laid flat, maintain gaps between each sheet for air circulation.

￿For best processing performance for a single item, adjust one shelf so that the article is centered in the oven.

			6
ELE International, Inc.	Distributor:	ELE International, Ltd.
		Chartmoor Road Chartwell Business
PO Box 608
		Park
Loveland, CO 80539
		Leighton Buzzard, Bedfordshire
USA
		LU7 4WG England
Phone: (970) 663-9780
		Phone: + (0) 1525 249200
Fax: (970) 663-9781
		Fax: + (0) 1525 249249
E-Mail: soiltest@eleusa.com
		E-Mail: ele@eleint.co.uk
Website: www.eleusa.com
		Website: www.eleint.co.uk