Cleaning and maintenance, After each wash | Electrolux 1271 VI

Cleaning and maintenance

After each wash

At the end of the wash programme, pull the dispenser drawer out a lit- tle to let it dry.

Leave the door ajar to allow air to circulate.

If the machine is not used for a prolonged period:

Close the water tap and unplug the appliance.

Periodical cleaning

Exterior

Clean the outside of the cabinet with soap and water only. Rinse with clean water and dry.

Important: do not use methylated spirits, solvents or similar products to clean the cabinet.

Detergent dispenser drawer

After a while, detergents and fabric softeners leave deposits in the drawer.

Clean the drawer, from time to

time, by rinsing it under a running

tap. To remove the drawer from the machine, press the button in the rear left-hand corner.

To facilitate cleaning, the top part of the additive compartment can be removed.

Detergent can also accumulate inside the drawer recess: clean it with an old tooth- brush.

Refit the drawer after cleaning.

35

Image 35

Electrolux 1271 VI Cleaning and maintenance, After each wash, Periodical cleaning Exterior, Detergent dispenser drawer

Contents

ÖKO-LAVAMAT 1271 VI Turbo Dear customer Contents Programme charts Bulding-in Technical data Service & Spare Parts Guarantee Conditions Installation Safety instructionsGeneral safety During use Child safety Machine DisposalPackaging materials Tips for environmental protection Main features of your washer-dryer Front view Description of the appliance Programme selector dial Control panel START/PAUSE button Delay Start buttonON/OFF button Mains-on light Programme Option buttons Drying Time button Prewash Programme progress display Display Set the machine to Pause by pressing the START/PAUSE button Cancelling a programmeAltering a programme which is running Opening the door after the programme has started Before the first wash Detergent dispenser drawer Sorting out and preparing the laundry Preparing the wash cycle Cotton 40 Weight of laundryTypes of fabric and care labels Cotton Delicates Which detergent? Detergents and additives Traditional Powders Which form? As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for drying Fibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying time Automatic washing and drying NON-STOP programme Additional drying Add detergent and additive How to washSwitching the machine on Load the laundry Spin Speed button the correspond- ing light comes on Selection of the desired wash programmeSelection of the spin speed Selection of the Extra Rinse and/or Rinse Hold option Starting the programme Selection of the Delay Start option At the end of the programme NON-STOP programme How to dryAutomatic washing and drying Drying only Wash programmes Programme chart Additional Max Duration Dry Special programmes Drying Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each wash Water inlet filter Drain filter Emergency emptying out Frost precautions Something not working? Troubleshooting Problem Noisy Feet have not been E00 White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinse This appliance complies with the following EC directives Technical data Help us to help you Service & Spare PartsService & Spare Parts 0990 929 Customer care Guarantee Conditions Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 European Guarantee Safety instructions for the installer Instructions for installation and electrical connection Rear view Front view and side view Tic bag and the previously removed screw InstallationUnpacking Carefully slide out the right poly- thene bag Carefully level by screwing PositioningLevelling Set the machine Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Electrical connections Interest of the environment Permanent connection Hinges Preparation and assembly of the doorBuilding-in Door Counter-magnet Mounting the door See Fig. H Drill four fixing holes see Fig. G Building-in