Installation

If you intend the drain hose from the machine to empty into a sink, make sure that the sink is empty and the plug hole is not blocked. Use the plastic “U -Piece” supplied.

Important

Before connecting up the machine to new pipework or to pipework that has not been used

for some time, run off a reasonable amount of

water to flush out any debris that may have collected in the pipes.

In the interest of the environment

Washing machines and dish- washers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treat- ment before being discharged safely into a river.

It is essential that these appli- ances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution.

If you require any further advice please contact your local authority drainage department.

SHOWER

SINK TOILET

BATHBIDET

WASHING

MACHINE DISHWASHER

RAINWATER

'RUN-OFF'

 

FOUL DRAIN

 

FOUL SEWERS

SURFACE WATER

 

 

 

DRAINS & SEWERS

SEWAGE

 

 

 

 

 

UNTREATED

TREATMENT

WORKS

 

 

DISCHARGE

 

 

TREATED

 

 

 

 

 

RIVER

DISCHARGE

 

RIVER

Electrical connections

WARNING: THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.

Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 Amp socket in another part of your home.

53

Page 53
Image 53
Electrolux 1271 VI manual Interest of the environment, Electrical connections