Installation, Unpacking | Electrolux 1271 VI manual

Installation

Unpacking

All transit bolts and packing must be removed before using the appli- ance.

Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor.

Remove the poly- styrene base and take off the bot- tom panel by unscrewing the central screw.

Carefully slide out the right poly- thene bag.

Repeat the opera- tion for the left and central poly- thene bags.

Re-fit the bottom panel using the 4

screws supplied with the door hinges (in the plas-

tic bag) and the previously removed screw.

50

Image 50

Electrolux 1271 VI manual Installation, Unpacking, Carefully slide out the right poly- thene bag

Contents

ÖKO-LAVAMAT 1271 VI Turbo Dear customer Contents Programme charts Technical data Service & Spare Parts Guarantee Conditions Bulding-in Installation Safety instructionsGeneral safety Child safety During use Machine DisposalPackaging materials Tips for environmental protection Main features of your washer-dryer Description of the appliance Front view Control panel Programme selector dial Mains-on light Delay Start buttonON/OFF button START/PAUSE button Drying Time button Programme Option buttons Prewash Display Programme progress display Opening the door after the programme has started Cancelling a programmeAltering a programme which is running Set the machine to Pause by pressing the START/PAUSE button Detergent dispenser drawer Before the first wash Preparing the wash cycle Sorting out and preparing the laundry Cotton Weight of laundryTypes of fabric and care labels Cotton 40 Delicates Detergents and additives Which detergent? Which form? Traditional Powders Garments not suitable for drying Preparing the drying cycleLoad As a dryer, the machine works on the condensation principle Modification of the drying time Drying symbols on garment labelsDuration of the drying cycle Fibre residue Additional drying Automatic washing and drying NON-STOP programme Load the laundry How to washSwitching the machine on Add detergent and additive Selection of the Extra Rinse and/or Rinse Hold option Selection of the desired wash programmeSelection of the spin speed Spin Speed button the correspond- ing light comes on Selection of the Delay Start option Starting the programme At the end of the programme Drying only How to dryAutomatic washing and drying NON-STOP programme Programme chart Wash programmes Special programmes Additional Max Duration Dry Drying After each wash Cleaning and maintenancePeriodical cleaning Exterior Detergent dispenser drawer Drain filter Water inlet filter Frost precautions Emergency emptying out Troubleshooting Something not working? Problem Noisy Feet have not been E00 Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundry Technical data This appliance complies with the following EC directives 0990 929 Service & Spare PartsService & Spare Parts Help us to help you Customer care Guarantee Conditions European Guarantee Italy Pordenone +39 1678 Sweden Stockholm +46 738 Slough +44 Instructions for installation and electrical connection Safety instructions for the installer Front view and side view Rear view Carefully slide out the right poly- thene bag InstallationUnpacking Tic bag and the previously removed screw Set the machine PositioningLevelling Carefully level by screwing Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Interest of the environment Electrical connections Permanent connection Door Preparation and assembly of the doorBuilding-in Hinges Mounting the door Counter-magnet Drill four fixing holes see Fig. G See Fig. H Building-in