30Operating User Interface Features
Setting Preferences, con’t
SYSTEM CLEAN
To clean and freshen the washer, perform the SYS- TEM CLEAN cycle. If you wish to begin the cycle, press select when prompted. The next screen will instruct you to remove all items from the wash drum, fill the bleach dispenser and press start. This maintenance cycle uses hot water and two rinses to remove residue that may cause odor.
NOTE
The washer will automatically prompt you to run the SYSTEM CLEAN cycle every 50 cycles. You may press the button under EXIT to manually perform the cycle at another time.
RESET
Press the buttons indicated to restore only cycle settings, reset only factory preferences (users, language, brightness, volume, etc.) or restore all factory defaults (both cycle settings and fac- tory preferences). Press the button under EXIT to return to normal operation or press the cancel button to turn the washer off without making any changes. If you do not make a selection within 30 seconds the washer will return to normal opera- tion without any changes. If you reset all settings, INSTALL CYCLE will be displayed as though the washer were just turned on for the first time. You may press the button under CANCEL if you do not wish to rerun the INSTALL CYCLE.
CONTRAST
Press the button beneath plus (+) or minus