Instructions for use
32
What to do if ...Remedying Faults
In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even dur-
ing the warranty period.
•If the fault code E10, E20 or E40 is shown in
the multidisplay, you may be able to remedy
the fault yourself (see Faults Table below). Af-
ter remedying the fault, press the button START/PAUSE (START/
PAUZE, MARCHE/PAUSE). If the fault code is shown again, inform
Customer Service.
•In the case of all other displayed faults (E and number or letter),
please inform the Customer Service and state the fault code.
Fault Possible Ca use Remedy
The machine does not
work.
The plug is not in the socket. Insert the plug.
The fuse or protection device
has tripped. Replace/reset the fuse.
The machine door was not
closed properly.
Close the door. You should
hear the door engage.
The START/PAUSE (START/
PAUZE, MARCHE/PAUSE)
button was not pressed long
enough.
Press the START/PAUSE
(START/PAUZE, MARCHE/
PAUSE) until the Programme
begins.
The door will not close. The child safety device has
been set.
Release the child safety de-
vice (see “Childsafety de-
vice”).
Error code E40 ap-
pears. The MAIN WASH
(HOOFDWAS, LAVAGE)
indicator flashes.
The door is not closed
properly.
Close the door properly.
Start the programme again.