Setting up and connection instructions
Water Inflow
A pressure hose 1.5m in length is supplied.
If a longer inflow hose is required, only a
–Sets of hoses in lengths of 2.2m, 3.5m and 5m are available for washing machines without
–Sets of hoses in lengths of 2.0m, 2.9m and 3.9m are available for washing machines with
Attention! Never cut into pieces in order to extend the hoses!
3 | Sealing rings are supplied either in the plastic |
| nuts of the hose screw connection or in the en- |
closed pack. Do not use other seals!
0 1. Connect the hose with the angled connection to the machine.
Attention!
– Do not lay the supply hose vertically downwards. Rather, turn it to the right or left as shown in the diagram.
– Only tighten the screw connection manually.
2. Connect the hose with the
straight connection to a water tap with a screw thread of R 3/4 (inches).
Attention! Only tighten the screw connection manually.
3. By slowly opening the water tap before putting the washing machine into operation, check whether the connection is free of leaks.
46
