Site Preparation, Preparing the Site | Electrolux 15 specification

Site Preparation	7

Preparing the Site

IMPORTANT

It is extremely important that the unit is level. If it is not level, the ice mold will not fill evenly. This can cause a reduction in ice rate, uneven sized cubes or water spilling into the storage area which will cause the ice in the bin to melt pre- maturely. Remember that floors near drains have a tendency to slope towards the drain.

1Position the unit on a flat, level surface, capable of supporting the entire weight of the unit. Remember that the unit will be significantly heavier once it is fully loaded.

2The surrounding air temperature must be at least 50°F (10°C) but must not exceed 110°F (43°C).

3The unit must not be located near heat- generating equipment or in direct sunlight.

DANGER

ELECTROCUTION HAZARD!

Electrical Grounding Required. This appliance is equipped with a three prong (grounding) polarized plug for your protection against possible shock hazards.

•NEVER remove the round grounding prong from the plug.

•NEVER use a two-prong grounding adapter.

•NEVER use an extension cord to connect power to the unit.

Where a two-prong wall receptacle is encountered or a longer power cord is required, contact a qualified electrician to have it replaced in accordance with applicable electrical codes.

4The unit must be located to allow clearance for water, drain and electrical connections in the rear of the ice maker.

5Connect the unit to a grounded and polarized 115 VAC, 60 Hz, 15 A circuit (normal household current).

6Avoid connecting the unit to a Ground Fault Interruptor (GFI). GFIs are prone to nuisance tripping which will cause the unit to shut down. GFIs are generally not used on circuits which power equipment that must run unattended for long periods of time.

7The unit must be installed according to your local codes and ordinances.

NOTE

The door of the unit may be mounted on either side of the cabinet (see REVERSING THE DOOR). All units require zero clearance when installed flush with a cabinet or wall (see Figure 2). Electrolux stainless steel models require

a minimum 2-3/4 inch handle clearance when installed against a wall or cabinet that extends beyond the front edge of the unit (see Figure 3).

	CABINET
	OR WALL
DOOR
SWING	0"
	0"
	CLEARANCE
Figure 2	NEEDED
Figure 2

2 - 3/4”

Figure 3

8Position the unit to allow free air flow through the front grille (see Figure 4).

9Wipe out inside of unit with a damp cloth.

EXHAUST	Figure 4	INTAKE
	Figure 4

15 specifications

Electrolux, a renowned name in home appliances, has unveiled its latest innovation, the Electrolux 15. This model marks a significant advancement in the realm of kitchen appliances, seamlessly blending style, efficiency, and cutting-edge technology.

The Electrolux 15 features a sleek and modern design that complements any kitchen aesthetic. It is available in various finishes, including stainless steel, black, and white, allowing users to select the best option to match their home décor. The intuitive control panel is user-friendly, showcasing a combination of touch-sensitive buttons and a digital display that makes it easy to navigate through its numerous functions.

One of the standout features of the Electrolux 15 is its advanced cooking technology. The inclusion of induction cooking technology ensures rapid heating while maintaining precise temperature control. This not only speeds up the cooking process but also provides energy efficiency, as it uses only the necessary energy to cook food perfectly. Additionally, the model is equipped with a powerful convection oven that ensures even cooking by circulating hot air around the food.

Moreover, the Electrolux 15 includes smart cooking solutions, such as pre-programmed settings for various dishes. These settings take the guesswork out of cooking, allowing users to select their desired dish and let the appliance handle the rest. The oven's built-in smart thermometer takes temperature readings, ensuring that meals are cooked to perfection, whether it’s a succulent roast or a delicate dessert.

Cleaning the Electrolux 15 is made simple with its self-cleaning technology. The oven features a pyrolytic cleaning function that heats the interior to high temperatures, reducing stuck-on food and grease to ash, which can then be easily wiped away.

Safety is also a priority with this model. The Electrolux 15 comes with a range of safety features, including auto shut-off and child lock functions, giving users peace of mind while cooking.

With its combination of aesthetic appeal, innovative features, and user-friendly functionalities, the Electrolux 15 sets a new standard in kitchen technology. It is designed not just to meet, but to exceed, the expectations of modern cooks, making meal preparation an enjoyable and efficient experience.

Electrolux 15 manual Site Preparation, Preparing the Site

Models: 15