ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
Cabinet side filler panels are necessary to isolate the unit from adjoining cabinets.
To reduce the risk of per- sonal injury and tipping of the wall oven, the wall oven must be secured to the cabinet (s) by mounting brackets. Refer to page 4 for mounting brackets installation.
Approx. 3”
(7.5 cm)
G
36” Min.
(91.4 cm) Min.
H
208/240 Volt junction box for
F
Use 3/4” (1.9 cm) plywood, installed on two runners, flush with toe plate. Must be capable of supporting 200 pounds (90 kg).
Cut an opening in wood base minimum 4” x 4” (10.2 X 10.2 cm), 2” (5 cm) from left side filler panel, to route armoured cable to junction box.
5” (12.7 cm) Max.
CUTOUT DIMENSIONS
| F. WIDTH | G. DEPTH | H. HEIGHT | |
|
|
|
| |
30" (76.2 cm) | 28 1/2" (72.4 cm) Min. | 24" (61 cm) Min. | 28 1/4" (71.8 cm) Min. | |
Wall Oven | 29" (73.7 cm) Max. | 28 7/8" (73.3 cm) Max. | ||
| ||||
|
|
|
|
Figure 8- TYPICAL UNDER COUNTER INSTALLATION OF AN ELECTRIC
5